... | ... | @@ -65,6 +65,11 @@ A Perspective rearranges the Elements of the IDE specific for a special task. Wh |
|
|
The build of your code failed - so there is no binary, hence it can not be found by the debugger. Fix the error(s) in your code until it compiles. Then repeat.
|
|
|
{blank}
|
|
|
|
|
|
== I get a message similar to "error #10099-D: program will not fit into available memory. run placement with alignment fails for section ".vtable" size 0x26c , overlaps with ".vecs", size 0x360 (page 0)" - what's wrong?
|
|
|
If you are using the TI-RTOS then it is likely you have tried to register an interrupt handler by using one of the `*IntRegister()` functions of the TivaWare library.
|
|
|
Since the RTOS handles interrupts itself using these functions is incompatible with it - avoid that and use the respective driver or set up an HWI instead.
|
|
|
{blank}
|
|
|
|
|
|
== I get the message CORTEX_M4_0: Error connecting to the target: Frequency is out of range.
|
|
|
You have either no Launchpad connected, or there is some other problem connecting to it.
|
|
|
|
... | ... | @@ -74,7 +79,7 @@ it *never worked before*:: and you are trying to connect for the *first time*. |
|
|
you have some driver problems (Windows)
|
|
|
|
|
|
*Linux*:::
|
|
|
the udev rules / drivers / permissions are wrong (Linux). Follow the steps TI recommends: link:http://processors.wiki.ti.com/index.php/Linux_Host_Support_CCSv6#Installation_Instructions[]
|
|
|
the udev rules / drivers / permissions are wrong. Follow the steps TI recommends: link:http://processors.wiki.ti.com/index.php/Linux_Host_Support_CCSv6#Installation_Instructions[]
|
|
|
|
|
|
it worked before::
|
|
|
|
... | ... | |