Skip to content

Changes

Page history
schroen created page: selected boards authored by Felix Schroen's avatar Felix Schroen
Hide whitespace changes
Inline Side-by-side
selected-boards.markdown
View page @ 6e236a3b
#### [<Board selection](https://es.technikum-wien.at/iplat/testwiki/wikis/board-research) #### [<Board research](https://es.technikum-wien.at/iplat/testwiki/wikis/board-research)
## Zybo Zynq™‑7000 SoC ## Zybo Zynq™‑7000 SoC
...@@ -13,4 +13,4 @@ The Zybo board is a powerful low-cost SoC development board. It is based on a po ...@@ -13,4 +13,4 @@ The Zybo board is a powerful low-cost SoC development board. It is based on a po
The Basys3 board is also a powerful and low-cost FPGA board. It contains 16 switches, 5 buttons, and four 7‑segment displays. This will give beginners a good entry point into digital hardware design because simple examples can be easily implemented and visually displayed. The internal ADC and the FPGA can be reached via the 4 P‑mod connectors. There are many add-on modules for the P‑mods. These modules contain different peripherals which can be accessed by an interface implementation in the FPGA. The modules can be found at the [Digilent Store](http://store.digilentinc.com/pmod-peripheral-modules/). Further on-board interfaces are VGA and USB which can be also utilized to implement some example designs. For more features and detailed descriptions see the [Basys3 Resource Center](https://reference.digilentinc.com/basys3/basys3). A further reason for the selection of the Basys3 was the documentation with tutorials and example implementations, all to be found at the [Basys3 Resource Center](https://reference.digilentinc.com/basys3/basys3). To sum up, the Basys3 is a solid and well-documented and supported FPGA development board for beginners. The Basys3 board is also a powerful and low-cost FPGA board. It contains 16 switches, 5 buttons, and four 7‑segment displays. This will give beginners a good entry point into digital hardware design because simple examples can be easily implemented and visually displayed. The internal ADC and the FPGA can be reached via the 4 P‑mod connectors. There are many add-on modules for the P‑mods. These modules contain different peripherals which can be accessed by an interface implementation in the FPGA. The modules can be found at the [Digilent Store](http://store.digilentinc.com/pmod-peripheral-modules/). Further on-board interfaces are VGA and USB which can be also utilized to implement some example designs. For more features and detailed descriptions see the [Basys3 Resource Center](https://reference.digilentinc.com/basys3/basys3). A further reason for the selection of the Basys3 was the documentation with tutorials and example implementations, all to be found at the [Basys3 Resource Center](https://reference.digilentinc.com/basys3/basys3). To sum up, the Basys3 is a solid and well-documented and supported FPGA development board for beginners.
#### [<Board selection](https://es.technikum-wien.at/iplat/testwiki/wikis/board-research) #### [<Board research](https://es.technikum-wien.at/iplat/testwiki/wikis/board-research)