... | ... | @@ -494,7 +494,7 @@ Possible challenges: |
|
|
Electronic design, magnetics (electrical engineering)
|
|
|
|
|
|
## [BachelorThesis] Evaluate debugWire for PlatformIO & design a small adapter board
|
|
|
Supervisor: Benjamin Aigner <aignerbtechnikum-wien.at>
|
|
|
Supervisor: Benjamin Aigner <aignerb@technikum-wien.at>
|
|
|
|
|
|
Debugging AVR microcontrollers is done via the so called debugWire interface (JTAG is available on some processors).
|
|
|
There is currently no practicable way to use the debugWire in GUIs like PlatformIO.
|
... | ... | @@ -537,6 +537,36 @@ Goal of this project would be the development of a Free and Open Source (FOSS) d |
|
|
|
|
|
USB, Wireshark, Python, HID driver development (libusb)
|
|
|
|
|
|
## [Bachelorthesis] Implement a setup assistant for AT devices
|
|
|
Supervisor: Benjamin Klaus <klaus@technikum-wien.at>
|
|
|
|
|
|
Our FLipMouse, FLipPad and FABI devices are configured via a web-based configuration manager. Due to the high flexibility, first-time users might be overwhelmed by the possibilities.
|
|
|
|
|
|
To simplify the first time configuration, a small setup assistant should be implemented in our WebGUIs.
|
|
|
|
|
|
Links to the WebGUIs:
|
|
|
|
|
|
* https://flipmouse.asterics.eu
|
|
|
* https://flippad.asterics.eu
|
|
|
* https://fabi.asterics.eu
|
|
|
* https://github.com/asterics/Addon-Bluetooth-WebGUI/ (Github repository)
|
|
|
|
|
|
**Technologies / Requirements**
|
|
|
|
|
|
Vue.js, Javascript, Git
|
|
|
|
|
|
## [Bachelorthesis] Design an alternative mouth-mouse stick
|
|
|
Supervisor: Benjamin Aigner <aignerb@technikum-wien.at>
|
|
|
|
|
|
Our FLipMouse device needs a mouthpiece to be operated either by mouth or by finger movements.
|
|
|
Currently, we are using a mouthpiece developed by the Quadstick team. Unfortunately these are very expensive and in some cases not comfortable.
|
|
|
|
|
|
In this project, different variants of mouthpieces with filters should be designed and tested.
|
|
|
They might be 3D printed, partly 3D printed and combined with other materials or completely based on cheap off the shelf products.
|
|
|
|
|
|
**Technologies / Requirements**
|
|
|
|
|
|
3D printing, CAD design (FreeCAD), mechanical design
|
|
|
|
|
|
## [Internship / Bachelorthesis] Evaluate different low-force sensor technologies
|
|
|
|
... | ... | |