Skip to content

GitLab

Commit cf72cf18 authored by Matthias Wenzl's avatar Matthias Wenzl
Browse files

added i2c and ssi pre-built configuration options

parent 3cbe6a01
Expand all Hide whitespace changes
Inline Side-by-side
.cproject
View file @ cf72cf18
This diff is collapsed.
TM4C1294XL/EK_TM4C1294XL.c
View file @ cf72cf18
......@@ -345,13 +345,21 @@ I2CTiva_Object i2cTivaObjects[EK_TM4C1294XL_I2CCOUNT];
/* I2C configuration structure, describing which pins are to be used */
const I2CTiva_HWAttrs i2cTivaHWAttrs[EK_TM4C1294XL_I2CCOUNT] = {
#if I2CM_7
{I2C7_BASE, INT_I2C7, ~0 /* Interrupt priority */},
#endif
#if I2CM_8
{I2C8_BASE, INT_I2C8, ~0 /* Interrupt priority */}
#endif
};
const I2C_Config I2C_config[] = {
{&I2CTiva_fxnTable, &i2cTivaObjects[0], &i2cTivaHWAttrs[0]},
{&I2CTiva_fxnTable, &i2cTivaObjects[1], &i2cTivaHWAttrs[1]},
#if I2CM_7
{&I2CTiva_fxnTable, &i2cTivaObjects[EK_TM4C1294XL_I2C7], &i2cTivaHWAttrs[EK_TM4C1294XL_I2C7]},
#endif
#if I2CM_8
{&I2CTiva_fxnTable, &i2cTivaObjects[EK_TM4C1294XL_I2C8], &i2cTivaHWAttrs[EK_TM4C1294XL_I2C8]},
#endif
{NULL, NULL, NULL}
};
......@@ -368,24 +376,26 @@ void EK_TM4C1294XL_initI2C(void)
* conflict before running your the application.
*/
/* Enable the peripheral */
SysCtlPeripheralEnable(SYSCTL_PERIPH_I2C7);
/* Configure the appropriate pins to be I2C instead of GPIO. */
GPIOPinConfigure(GPIO_PD0_I2C7SCL);
GPIOPinConfigure(GPIO_PD1_I2C7SDA);
GPIOPinTypeI2CSCL(GPIO_PORTD_BASE, GPIO_PIN_0);
GPIOPinTypeI2C(GPIO_PORTD_BASE, GPIO_PIN_1);
/* I2C8 Init */
/* Enable the peripheral */
SysCtlPeripheralEnable(SYSCTL_PERIPH_I2C8);
/* Configure the appropriate pins to be I2C instead of GPIO. */
GPIOPinConfigure(GPIO_PA2_I2C8SCL);
GPIOPinConfigure(GPIO_PA3_I2C8SDA);
GPIOPinTypeI2CSCL(GPIO_PORTA_BASE, GPIO_PIN_2);
GPIOPinTypeI2C(GPIO_PORTA_BASE, GPIO_PIN_3);
#if I2CM_7
SysCtlPeripheralEnable(SYSCTL_PERIPH_I2C7);
/* Configure the appropriate pins to be I2C instead of GPIO. */
GPIOPinConfigure(GPIO_PD0_I2C7SCL);
GPIOPinConfigure(GPIO_PD1_I2C7SDA);
GPIOPinTypeI2CSCL(GPIO_PORTD_BASE, GPIO_PIN_0);
GPIOPinTypeI2C(GPIO_PORTD_BASE, GPIO_PIN_1);
#endif
/* I2C8 Init */
/* Enable the peripheral */
#if I2CM_8
SysCtlPeripheralEnable(SYSCTL_PERIPH_I2C8);
/* Configure the appropriate pins to be I2C instead of GPIO. */
GPIOPinConfigure(GPIO_PA2_I2C8SCL);
GPIOPinConfigure(GPIO_PA3_I2C8SDA);
GPIOPinTypeI2CSCL(GPIO_PORTA_BASE, GPIO_PIN_2);
GPIOPinTypeI2C(GPIO_PORTA_BASE, GPIO_PIN_3);
#endif
I2C_init();
}
......@@ -568,7 +578,8 @@ uint32_t spiTivaDMAscratchBuf[EK_TM4C1294XL_SPICOUNT];
/* SPI configuration structure */
const SPITivaDMA_HWAttrs spiTivaDMAHWAttrs[EK_TM4C1294XL_SPICOUNT] = {
{
#if SSIM_2
{
SSI2_BASE,
INT_SSI2,
~0, /* Interrupt priority */
......@@ -580,6 +591,8 @@ const SPITivaDMA_HWAttrs spiTivaDMAHWAttrs[EK_TM4C1294XL_SPICOUNT] = {
UDMA_CH12_SSI2RX,
UDMA_CH13_SSI2TX
},
#endif
#if SSIM_3
{
SSI3_BASE,
INT_SSI3,
......@@ -592,11 +605,16 @@ const SPITivaDMA_HWAttrs spiTivaDMAHWAttrs[EK_TM4C1294XL_SPICOUNT] = {
UDMA_CH14_SSI3RX,
UDMA_CH15_SSI3TX
}
#endif
};
const SPI_Config SPI_config[] = {
{&SPITivaDMA_fxnTable, &spiTivaDMAObjects[0], &spiTivaDMAHWAttrs[0]},
{&SPITivaDMA_fxnTable, &spiTivaDMAObjects[1], &spiTivaDMAHWAttrs[1]},
#if SSIM_2
{&SPITivaDMA_fxnTable, &spiTivaDMAObjects[EK_TM4C1294XL_SPI2], &spiTivaDMAHWAttrs[EK_TM4C1294XL_SPI2]},
#endif
#if SSIM_3
{&SPITivaDMA_fxnTable, &spiTivaDMAObjects[EK_TM4C1294XL_SPI3], &spiTivaDMAHWAttrs[EK_TM4C1294XL_SPI3]},
#endif
{NULL, NULL, NULL}
};
......@@ -612,27 +630,31 @@ void EK_TM4C1294XL_initSPI(void)
* an application. Modify the pin mux settings in this file and resolve the
* conflict before running your the application.
*/
SysCtlPeripheralEnable(SYSCTL_PERIPH_SSI2);
#if SSIM_2
SysCtlPeripheralEnable(SYSCTL_PERIPH_SSI2);
GPIOPinConfigure(GPIO_PD3_SSI2CLK);
GPIOPinConfigure(GPIO_PD2_SSI2FSS);
GPIOPinConfigure(GPIO_PD1_SSI2XDAT0);
GPIOPinConfigure(GPIO_PD0_SSI2XDAT1);
GPIOPinConfigure(GPIO_PD3_SSI2CLK);
GPIOPinConfigure(GPIO_PD2_SSI2FSS);
GPIOPinConfigure(GPIO_PD1_SSI2XDAT0);
GPIOPinConfigure(GPIO_PD0_SSI2XDAT1);
GPIOPinTypeSSI(GPIO_PORTD_BASE, GPIO_PIN_0 | GPIO_PIN_1 |
GPIO_PIN_2 | GPIO_PIN_3);
GPIOPinTypeSSI(GPIO_PORTD_BASE, GPIO_PIN_0 | GPIO_PIN_1 |
GPIO_PIN_2 | GPIO_PIN_3);
/* SSI3 */
SysCtlPeripheralEnable(SYSCTL_PERIPH_SSI3);
#endif
#if SSIM_3
/* SSI3 */
SysCtlPeripheralEnable(SYSCTL_PERIPH_SSI3);
GPIOPinConfigure(GPIO_PQ0_SSI3CLK);
GPIOPinConfigure(GPIO_PQ1_SSI3FSS);
GPIOPinConfigure(GPIO_PQ2_SSI3XDAT0);
GPIOPinConfigure(GPIO_PQ3_SSI3XDAT1);
GPIOPinConfigure(GPIO_PQ0_SSI3CLK);
GPIOPinConfigure(GPIO_PQ1_SSI3FSS);
GPIOPinConfigure(GPIO_PQ2_SSI3XDAT0);
GPIOPinConfigure(GPIO_PQ3_SSI3XDAT1);
GPIOPinTypeSSI(GPIO_PORTQ_BASE, GPIO_PIN_0 | GPIO_PIN_1 |
GPIO_PIN_2 | GPIO_PIN_3);
GPIOPinTypeSSI(GPIO_PORTQ_BASE, GPIO_PIN_0 | GPIO_PIN_1 |
GPIO_PIN_2 | GPIO_PIN_3);
#endif
EK_TM4C1294XL_initDMA();
SPI_init();
}
......
application.cfg
View file @ cf72cf18
......@@ -44,12 +44,6 @@ BIOS.libType = BIOS.LibType_Custom;
BIOS.logsEnabled = false;
BIOS.assertsEnabled = false;
/*** Network stack memory pool - fixed size head ***/
var heapBufParams = new HeapBuf.Params();
heapBufParams.blockSize = 1536;
heapBufParams.numBlocks = 8;
Program.global.cfg_netHeap = HeapBuf.create(heapBufParams);
/* ================ Driver configuration ================ */
/*
......@@ -68,3 +62,9 @@ driversConfig.libType = driversConfig.LibType_NonInstrumented;
Task.idleTaskStackSize = 512;
BIOS.heapSize = (1024*10*2);/*system heap - used for task stacks for example*/
/*
Buffer size for system_printf() - use with care -
it is SLOW, needs system_flush() after every call and
may cause observation of unpredictable behaviour
*/
SysMin.bufSize = 1024;
local_inc/EK_TM4C1294XL.h
View file @ cf72cf18
......@@ -50,6 +50,24 @@
extern "C" {
#endif
/*i2c configuration*/
#define I2CM_7 1
#define I2CM_8 1
/*spi configguration*/
#define SSIM_2 1
#define SSIM_3 1
#if (I2CM_7 && SSIM_2)
#error "I2M_7 and SSIM_2 use the same physical pins -> conflict - Please configure to your needs (local_inc/EK_TM4C1294XL.h)"
#endif
#if (I2CM_8 && SSIM_3)
#error "I2M_8 and SSIM_3 use the same physical pins -> conflict - Please configure to your needs (local_inc/EK_TM4C1294XL.h)"
#endif
/* LEDs on EK_TM4C1294XL are active high. */
#define EK_TM4C1294XL_LED_OFF (0)
#define EK_TM4C1294XL_LED_ON (1)
......@@ -82,8 +100,12 @@ typedef enum EK_TM4C1294XL_GPIOName {
* @brief Enum of I2C names on the EK_TM4C1294XL dev board
*/
typedef enum EK_TM4C1294XL_I2CName {
EK_TM4C1294XL_I2C7 = 0,
#if I2CM_7
EK_TM4C1294XL_I2C7,
#endif
#if I2CM_8
EK_TM4C1294XL_I2C8,
#endif
EK_TM4C1294XL_I2CCOUNT
} EK_TM4C1294XL_I2CName;
......@@ -114,8 +136,12 @@ typedef enum EK_TM4C1294XL_SDSPIName {
* @brief Enum of SPI names on the EK_TM4C1294XL dev board
*/
typedef enum EK_TM4C1294XL_SPIName {
EK_TM4C1294XL_SPI2 = 0,
#if SSIM_2
EK_TM4C1294XL_SPI2,
#endif
#if SSIM_3
EK_TM4C1294XL_SPI3,
#endif
EK_TM4C1294XL_SPICOUNT
} EK_TM4C1294XL_SPIName;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment