Commit c0c35fb7 authored by Peter Stuge's avatar Peter Stuge
Browse files

lmicdiusb: Convert text file line endings from CRLF to LF

parent b5ca350b
// This is the list of commands supported by the in circuit debugger on the
// Stellaris LM4F120 LaunchPad.
//Start Rcmd's
*debug
**mode - do nothing
**disable - disable DAP
**speed - argument < 5
**trace - do nothing
**unlock - Perform Debug mass erase (factory reset)
**sreset - System Reset
**creset - core reset only
**hreset - hardware pin reset
*set
**resettype - do nothing
**vectorcatch - set or clear vector catch bit in the DAP accepts 1 or 0
**stepirq - set or clear the step irq bit in the DAP
**xtal - set xtal value for Sandstorm, Fury and DustDevil, NOP for other classes
*version - get version number of the firmware
*dfu-update - jump to DFU bootloader.
*mfg
**setu0 - set user 0 register, used for serial #'s and MAC's.
**setu1 - set user 1 register, used for serial #'s and MAC's.
**getu0 - get user 0 register, used for serial #'s and MAC's.
**getu1 - get user 1 register, used for serial #'s and MAC's.
//END Rcmd's
//Start regular commands
*! -> extend mode
*? -> halt core
*A -> nothing
*c -> start the core (continue)
*C -> start the core (continue)
*D -> Detach
*F -> break
*g -> send complete registers set
*G -> nothing
*H -> sends back empty response
*i -> nothing
*I -> nothing
*m -> read memory
*M -> write memory
*p -> read register
*P -> write register
*q -> same as 'Q'
*R -> reset and continue
*s -> read state of DHCS?
*S -> identical to s
*t -> nothing
*T -> nothing
*x -> read memory binary
*X -> write memory binary
*z -> remove breakpoint
*Z -> Add breakpoint
*v
**FlashErase
**FlashWrite
**FlashDone
**Cont? -> send empty respsonse
*Q -> query packets,
** supported -> gets info about the target and what it supports?
** Xfer -> send back the memory map
** Rcmd -> call GDBInterpretCommand which processes Rcmd's listed above.
// This is the list of commands supported by the in circuit debugger on the
// Stellaris LM4F120 LaunchPad.
//Start Rcmd's
*debug
**mode - do nothing
**disable - disable DAP
**speed - argument < 5
**trace - do nothing
**unlock - Perform Debug mass erase (factory reset)
**sreset - System Reset
**creset - core reset only
**hreset - hardware pin reset
*set
**resettype - do nothing
**vectorcatch - set or clear vector catch bit in the DAP accepts 1 or 0
**stepirq - set or clear the step irq bit in the DAP
**xtal - set xtal value for Sandstorm, Fury and DustDevil, NOP for other classes
*version - get version number of the firmware
*dfu-update - jump to DFU bootloader.
*mfg
**setu0 - set user 0 register, used for serial #'s and MAC's.
**setu1 - set user 1 register, used for serial #'s and MAC's.
**getu0 - get user 0 register, used for serial #'s and MAC's.
**getu1 - get user 1 register, used for serial #'s and MAC's.
//END Rcmd's
//Start regular commands
*! -> extend mode
*? -> halt core
*A -> nothing
*c -> start the core (continue)
*C -> start the core (continue)
*D -> Detach
*F -> break
*g -> send complete registers set
*G -> nothing
*H -> sends back empty response
*i -> nothing
*I -> nothing
*m -> read memory
*M -> write memory
*p -> read register
*P -> write register
*q -> same as 'Q'
*R -> reset and continue
*s -> read state of DHCS?
*S -> identical to s
*t -> nothing
*T -> nothing
*x -> read memory binary
*X -> write memory binary
*z -> remove breakpoint
*Z -> Add breakpoint
*v
**FlashErase
**FlashWrite
**FlashDone
**Cont? -> send empty respsonse
*Q -> query packets,
** supported -> gets info about the target and what it supports?
** Xfer -> send back the memory map
** Rcmd -> call GDBInterpretCommand which processes Rcmd's listed above.
Copyright (c) 2011-2012 Texas Instruments Incorporated.
All rights reserved.
Software License Agreement
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
Redistributions of source code must retain the original copyright
notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the original copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the
distribution.
Neither the name of Texas Instruments Incorporated nor the names of
its contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Copyright (c) 2011-2012 Texas Instruments Incorporated.
All rights reserved.
Software License Agreement
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
Redistributions of source code must retain the original copyright
notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the original copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the
distribution.
Neither the name of Texas Instruments Incorporated nor the names of
its contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment