sig_proc_osci_hardware.asciidoc

+== https://es.technikum-wien.at/openlab/openlab_wiki/wikis/home[Home] | https://es.technikum-wien.at/openlab/openlab_wiki/wikis/sig_proc_hardware[<Signal Processing Hardware] | https://es.technikum-wien.at/openlab/openlab_wiki/wikis/ETS_theory[Equivalent Time Sampling - Theory>]
+
+= Signal Processing Hardware (Oscilloscope)
+
+To enable the measurement of analog waveforms outside of the ADCs input voltage range, the measured signal has to pass several signal processing stages. +
+The analog hardware prepares the signal for digitalization.
+
+{empty} +
+
+Figure 1 shows an overview of the front-end stages and is applied to both analog channels of the Signal-Toolkit.
+
+{empty} +
+
+image::https://es.technikum-wien.at/openlab/openlab_wiki/wikis/img/sig_proc_osci_hardware/sig_proc_osci_hardware_overview.PNG[caption="Figure 1: ",title="Overview of the structural design of the OpenLab oscilloscope front-end",align="center"]
+
+{empty} +
+
+A detailed description of each stage will be given by the following sub-chapters.
+
+{empty} +
+
+* https://es.technikum-wien.at/openlab/openlab_wiki/wikis/sig_proc_osci_stage1[Stage 1 Front-End Impedance and Capacitance Matching]
+* https://es.technikum-wien.at/openlab/openlab_wiki/wikis/sig_proc_osci_stage2[Stage 2 Offset Compensation and Op-amp Input Stage]
+* https://es.technikum-wien.at/openlab/openlab_wiki/wikis/sig_proc_osci_stage3[Stage 3 Variable Amplification]
+* https://es.technikum-wien.at/openlab/openlab_wiki/wikis/sig_proc_osci_stage4[Stage 4 Adding a Constant Offset to the Signal]
+* https://es.technikum-wien.at/openlab/openlab_wiki/wikis/sig_proc_osci_stage5[Stage 5 ADC Protection]
+* https://es.technikum-wien.at/openlab/openlab_wiki/wikis/sig_proc_osci_stage6[Stage 6 Impedance converter]
+* https://es.technikum-wien.at/openlab/openlab_wiki/wikis/sig_proc_osci_stage7[Stage 7 Trigger detection]
+
+{empty} +
+
+== https://es.technikum-wien.at/openlab/openlab_wiki/wikis/home[Home] | https://es.technikum-wien.at/openlab/openlab_wiki/wikis/sig_proc_hardware[<Signal Processing Hardware] | https://es.technikum-wien.at/openlab/openlab_wiki/wikis/ETS_theory[Equivalent Time Sampling - Theory>]