ETS_theory.asciidoc

@@ -36,6 +36,7 @@ For example, if the oscilloscope captures in ETS mode and the user disables the
 {empty} +
 
 [.float-group]
+--
 [.center]
 image::https://es.technikum-wien.at/openlab/openlab_wiki/wikis/img/ETS_theory/ETS_glitch.png[caption="Figure 1: ",title="Non-repititive signal captured using ETS (1)",height=300]
 
@@ -44,12 +45,9 @@ image::https://es.technikum-wien.at/openlab/openlab_wiki/wikis/img/ETS_theory/ET
 
 [.center]
 image::https://es.technikum-wien.at/openlab/openlab_wiki/wikis/img/ETS_theory/ETS_glitch_OpenLab.png[caption="Figure 2: ",title="Non-repetitive signal captured with the OpenLab oscilloscope using the ETS mode",height=300]
+--
 
 The reason for this is similar to the effect described by the Tektronix article [1].
-ETS depends very much on repetitive trigger events. The acquisition will not work probably if the limitations of ETS are ignored.
-
-ETS acquires signals by taking samples across multiple trigger events. This “scans” the signal step by step and enables an accurate representation of the captured waveform.
-This process is illustrated in figure 3.
 
 == Bibliography