getting-started-zybo.md

@@ -115,11 +115,42 @@ In the **Flow Navigator** toolbar click the **Generate Bitstream** button which
 
 A window should pop up once the bitstream generation finished successfully. Click on **Cancel**.
 
+Now click on **File -> Export -> Export Hardware**.Check the **Include bitstream** checkbox and leave the **Export to:** dropdown menu at **<Local to project**. Click **OK**.
+
+![](https://es.technikum-wien.at/iplat/testwiki/raw/master/getting-started-zybo/img/tutorial_zybo16.png)
+
+Finally, click on **File -> Launch SDK**. Leave both options at **<Local to project**. Click **OK**.
+
+![](https://es.technikum-wien.at/iplat/testwiki/raw/master/getting-started-zybo/img/tutorial_zybo17.png)
+
+This concludes the Hardware generation process. 
+
 ### 5.2.2 Xilinx SDK
 
+Click on **File -> New -> Application Project** to create a new project. As project name enter**blink_led**. Leave all other options at their default values. Click **Next**. 
+
+![](https://es.technikum-wien.at/iplat/testwiki/raw/master/getting-started-zybo/img/tutorial_zybo18.png)
+
+Click on the **Empty Application** Template and click **Finish**.
+
+![](https://es.technikum-wien.at/iplat/testwiki/raw/master/getting-started-zybo/img/tutorial_zybo19.png)
+
+Once the project is sucessfully created right click on the **blink_led** project and click on **Import**.
+
+![](https://es.technikum-wien.at/iplat/testwiki/raw/master/getting-started-zybo/img/tutorial_zybo20.png)
+
+Choose **General -> File System** and click **Next**. 
+
+![](https://es.technikum-wien.at/iplat/testwiki/raw/master/getting-started-zybo/img/tutorial_zybo21.png)
+
+Browse to the location of the downloadand extracted GettingStartedZybo.zip file. Select **main.c** and click **Finish**.
+
+![](https://es.technikum-wien.at/iplat/testwiki/raw/master/getting-started-zybo/img/tutorial_zybo22.png)
+
+
 ### 5.2.3 Board Setup
 
-Make sure that **JP2** is configured to use **USB** as power source. Furthermore, make sure **JP1** is configured to the **JTAG** mode. Insert a micro USB cable to **JC4** and connect it to your PC. Make sure that the switches **SW0 - SW15** are in the off position.
+Make sure that **JP14** is configured to use **USB** as power source. Furthermore, make sure **JP5** is configured to the **JTAG** mode. Insert a micro USB cable to **J11** and connect it to your PC. Make sure that the switches **SW0 - SW15** are in the off position.
 
  Finally, switch **SW16** to the on position. 
 
@@ -128,6 +159,12 @@ Make sure that **JP2** is configured to use **USB** as power source. Furthermore
 
 ### 5.2.4 Test the Application
 
+Finally, right click on the **blink_led** project and click on **Run as -> Run Configurations**. Double click on **Xilinx C/C++ application (GDB).
+
+![](https://es.technikum-wien.at/iplat/testwiki/raw/master/getting-started-zybo/img/tutorial_zybo23.png)
+
+Click on the **STDIO Connection** tab. Check the **Connect STDIO to Console** checkbox
+
 In the **Project Manager** toolbar click the **Open Hardware Manager** button which can be found in the Program and Debug subsection.
 
 ![](https://es.technikum-wien.at/iplat/testwiki/raw/master/getting-started-basys3/img/tutorial_basys7.png)