getting-started-basys3.md

@@ -16,7 +16,7 @@ Following pre-requisites are necessary in order to work through this tutorial:
 + Basys3 Development Board 
 + micro USB cable
 
-###5.1.2 Download the Design files
+### 5.1.2 Download the Design files
 
 An archive with the design files can be downloaded [here](https://es.technikum-wien.at/iplat/testwiki/raw/master/getting-started-basys3/design-files/GettingStartedBasys3.zip).
 
@@ -26,11 +26,11 @@ This section explains how to generate the FPGA hardware bitstream using the Xili
 
 ### 5.2.1  Building the Bitstream
 
-_1. Launch Vivado:_**
+_1. Launch Vivado:_
 
 + select **Start > All Programs > Xilinx Design Tools > Vivado 2015.4 > Vivado 2015.4**
 
-_2. Create new Project_**
+_2. Create new Project_
 
 Click on the **Create New Project** button in the quick start menu. Click **Next**.  Enter blink_led as the Project name. Click **Next**.
 
@@ -38,7 +38,7 @@ Click on the **Create New Project** button in the quick start menu. Click **Next
 
 Select RTL Project. Make sure that the ** Do not specify sources at this time** checkbox is **not** selected. Click **Next**.
 
-![Pic1](https://es.technikum-wien.at/iplat/testwiki/tree/master/getting-started-basys3/img/tutorial_basys1.png)
+![](https://es.technikum-wien.at/iplat/testwiki/tree/master/getting-started-basys3/img/tutorial_basys1.png)
 
 Click on the **Add Files** Button. Browse to the previously downloaded and extracted zip folder. Select **blink_led.vhd** and click **OK**. Make sure that the **Copy sources into project** checkbox is selected. And the Target language and Simulator Language is set to VHDL. Click **Next** twice.